Weight: 1.0 lb.

Drawings: PCB Dimensions

Mating Connectors: Mating connectors are not supplied with the charger. As a convenience, a connector kit is available.

Recommended Wire Size: #18 AWG stranded.
Dimensions: 4.0"L x 3.0"W x 1.9"H (including the required 3/16" miminum-height standoffs)

Input Connector: 6 Pin Header, 0.045" square pins, 0.156" spacing - Molex P/N 26-60-4060
Mating Connector: Molex P/N 09-50-8063 (Not supplied)

Output Connector: 4 Pin Header, 0.045" square pins, 0.156" spacing - Molex P/N 26-60-4040
Mating Connector: Molex P/N 09-50-8043 (Not supplied)